Toggle latches Spring Loaded

  • Spring Loaded Toggle Latches Toggle Latches Spring Loaded 1
  • Spring Loaded Toggle Latches Toggle Latches Spring Loaded 2
Description Technical sheet Supplements
Totally enclosed spring mechanism.
Allows positional misalignment.
Latch always under tension.
Interchangeable with American models.
Possibility of sealing.
P2012 with padlock hasp.
Fail safe design prevents over extension of the link.
Suitable for screw fixing or welding.
Compression springs in stainless steel in all versions.
The spring mechanism is protected against the ingress of rain.
Assembly rivets in stainless steel in all versions.
Very good flexibility of use.
Extended positioning capabilities.
Particularly recommended where there is no seal.
Very good aesthetics.
Run-off protection.
Approximate fixing position to give 30daN tension, using catch plate AC 113
x = 48mm
Maximum operating tension: 35daN
Recommended catch plate: AC 113
Lever: Metal thickness 1.5mm
Base: Metal thickness 1.5mm
Link: Side bars 1.5mm thick
Locking pin 3.5mm dia.
under tension.
Interchangeable with American models.
Possibility of sealing.
P2012 with padlock hasp.
Fail safe design prevents over extension of the link.
Suitable for screw fixing or welding.
Download IGS file
MATERIALFINISHFIXATIONWEIGHT THEORIQUE
KG/HUNDRED
REFERENCES
Steelyellow zinc platingwith holes3,800GP.12-ZB*
Steelwhite zinc platingwith holes3,800GP.12-ZI
Steel chrome plated with holes 3,800 GP.12-CH
Stainless steel 18/8 raw with holes 3,800 GP.12-IB
Stainless steel 18/8 raw without hole 3,830 GP.12-AIB*
Stainless steel 18/8 polished with holes3,830 GP.12-IP
* Articles made on request

Associated products