Toggle latches Spring Loaded

  • Spring Loaded Toggle Latches Toggle Latches Spring Loaded 1
  • Spring Loaded Toggle Latches Toggle Latches Spring Loaded 2
Description Technical sheet Supplements
Available with or without padlock facility.
Interchangeable with American models.
Wide positioning tolerance created by spring mechanism.
Fail safe design prevents over extension of links.
An immobilising spring is available to hold the latch flat against the equipment to which it is mounted when the latch is in the open position. This prevents the open latch rattling and renders it less liable to accidental damage.
Wide positioning tolerance created by spring mechanism
Fail safe design prevents over extension of links
Available with or without padlock facility.
Interchangeable with American models.
Wide positioning tApproximate fixing position to give 20daN tension,
using catch plate AC 101: x = 52.4 mm,
using catch plate AC 104: x = 63.2 mm
Maximum operating tension: 30daN
Recommended Catch Plate: Type AC 101 or AC 104
Lever: Metal Thickness 1.5 mm
Base: Metal Thickness, Type GP 2: 2.0 mm,
Type GP 8: 1.5 mm
Link (Interior): Metal Thickness 1.5 mm
Link (Exterior): Metal Thickness 1.5 mm
Springs: 1.3 mm diameter piano wire, steel
1.4 mm diameter piano wire, stainless steel
Locking pin: 3 mm diameterolerance created by spring mechanism.
Fail safe design prevents over extension of links.
Download IGS file
MATERIALFINISHFIXATIONWEIGHT THEORETIC
KG/HUNDRED
REFERENCES
Steelrawwith holes2,950GP.2-BR*
Steelyellow zinc platingwith holes Ø 3.652,950GP.2-ZB*
Steelwhite zinc platingwith holes Ø 3.652,950GP.2-ZI
Stainless steel 18/8rawwith holes Ø 3.652,950GP.2-IB
Steelwhite zinc platingwith holes Ø 4.22,950GP.2-EZI
Stainless steel 18/8rawwith holes Ø 4.22,950GP.2-EIB*
* Articles made on request

Associated products